Microbial succession during the transition from active to inactive stages of deep-sea hydrothermal vent sulfide chimneys

Background Deep-sea hydrothermal vents are highly productive biodiversity hotspots in the deep ocean supported by chemosynthetic microorganisms. Prominent features of these systems are sulfide chimneys emanating high-temperature hydrothermal fluids. While several studies have investigated the microbial diversity in both active and inactive sulfide chimneys that have been extinct for up to thousands of years, little is known about chimneys that have ceased activity more recently, as well as the microbial succession occurring during the transition from active to inactive chimneys. Results Genome-resolved metagenomics was applied to an active and a recently extinct (~ 7 years) sulfide chimney from the 9–10° N hydrothermal vent field on the East Pacific Rise. Full-length 16S rRNA gene and a total of 173 high-quality metagenome assembled genomes (MAGs) were retrieved for comparative analysis. In the active chimney (L-vent), sulfide- and/or hydrogen-oxidizing Campylobacteria and Aquificae with the potential for denitrification were identified as the dominant community members and primary producers, fixing carbon through the reductive tricarboxylic acid (rTCA) cycle. In contrast, the microbiome of the recently extinct chimney (M-vent) was largely composed of heterotrophs from various bacterial phyla, including Delta-/Beta-/Alphaproteobacteria and Bacteroidetes. Gammaproteobacteria were identified as the main primary producers, using the oxidation of metal sulfides and/or iron oxidation coupled to nitrate reduction to fix carbon through the Calvin-Benson-Bassham (CBB) cycle. Further analysis revealed a phylogenetically distinct Nitrospirae cluster that has the potential to oxidize sulfide minerals coupled to oxygen and/or nitrite reduction, as well as for sulfate reduction, and that might serve as an indicator for the early stages of chimneys after venting has ceased. Conclusions This study sheds light on the composition, metabolic functions, and succession of microbial communities inhabiting deep-sea hydrothermal vent sulfide chimneys. Collectively, microbial succession during the life span of a chimney could be described to proceed from a “fluid-shaped” microbial community in newly formed and actively venting chimneys supported by the oxidation of reductants in the hydrothermal fluid to a “mineral-shaped” community supported by the oxidation of minerals after hydrothermal activity has ceased. Remarkably, the transition appears to occur within the first few years, after which the communities stay stable for thousands of years. Video Abstract


Introduction
Since the discovery of the first deep-sea hydrothermal vent (DSHV) near the Galapagos Islands in 1977 [1], more than 700 DSHV fields have been discovered and investigated along mid-oceanic ridges and other tectonically active areas of the ocean [2]. Water-rock reactions at high temperatures generated by subsurface magmatic heating transforms the seawater percolating into the ocean crust into hot, reduced, metal-rich hydrothermal fluids that vent from the seafloor. Therefore, DSHV systems are considered a critical conduit for the exchange of energy and matter between the Earth's interior and the ocean [3,4]. The hydrothermal vent field located on East Pacific Rise (EPR) at 9-10°N is an archetypical fastspreading mid ocean ridge system (550 mm year −1 ) and as a result of a range of multi-and interdisciplinary studies over the last two and half decades represents one of the best studied hydrothermal systems [5]. More importantly, two volcanic eruptions have been documented at this location in 1991 and 2006 with dramatic effects on the geology, chemistry, and biology [5][6][7][8][9], providing unparalleled opportunities to study the evolution of a hydrothermal vent system with dynamic volcanic activity as well as the corresponding microbial succession.
Hydrothermal sulfide chimneys are typical vent structures, which are formed over short spatial and temporal scales by the precipitation of metal sulfides following the mixing of venting hydrothermal fluids with the surrounding cool, oxygenated seawater [10,11]. The resulting thermodynamic and redox disequilibria provide conditions conducive for the growth of chemoautotrophic microorganisms, which colonize the interior and exterior parts of chimney walls according to their growth preference and contribute to the overall biomass production at DSHV [12,13]. Previous microbiological investigations have shown that the microbial communities inhabiting active sulfide chimneys are diverse, including Campylobacteria (previously known as Epsilonproteobacteria [14]), Aquificae, Gammaproteobacteria, and some archaeal taxa [15][16][17]. Among them, Campylobacteria are frequently found as the dominant chemoautotrophic microorganisms of active hydrothermal vent chimneys [16,[18][19][20][21][22][23][24][25], often forming microbial mats covering the exterior of venting chimneys [21,23,26,27]. Most Campylobacteria identified at DSHV are uncultured, but information on available isolates and incubation studies suggests that they are either thermophiles or mesophiles with the capability of chemoautotrophy driven by oxidation of H 2 and/or H 2 S dissolved in the vent fluids [14,[28][29][30][31][32]. However, once hydrothermal activity ceases, the disappearance of the previously available energy sources and thermal gradients results in a pronounced shift of the microbial communities inhabiting the inactive chimneys to a community dominated by Gamma-, Delta-, Alpha-, Betaproteobacteria, and Bacteroidetes [19,[33][34][35][36][37]. Most of the studies on inactive chimneys have focused on revealing the microbial diversity and community structure using 16S rRNA-based analyses [19,[33][34][35][36]. Only recently, meta-"omic" approaches have been applied to study microbial metabolic potentials in extinct chimneys, which indicated that, among other findings, the oxidation of metal sulfides serves as important energy source mediated mainly by sulfur-oxidizing Gammaproteobacteria [37]. However, most of the inactive chimneys studied so far have been extinct for a long time (up to more than thousand years) [34][35][36]. Although the study by Meier et al [37] included a recently extinct chimney, dating put the age range of the chimney between 0 and160 years, and thus, the exact time when it became extinct is not known. Consequently, at present, less is known about the changes and succession in the microbial communities that occur in the immediate aftermath once an actively venting chimney becomes inactive.
Here, a sulfide sample from actively venting chimney (L-vent) and the other one from the inactive chimney (M-vent), which ceased venting 7 years before sampling as a result of the eruption in 2006 [5]), were collected in early 2014 from the hydrothermal vent field at 9-10°N EPR. The composition and the metabolic capabilities of their resident microbial communities were analyzed using genome-resolved metagenomics to elucidate the changes occurring during the transition from an active to an inactive chimney. Based on our data and available information from previous studies, we are proposing a conceptual model of microbial succession from "fluidshaped" microbial community in newly formed and mature actively venting chimneys supported by the oxidation of reductants in the hydrothermal fluid to a "mineral-shaped" community supported by the oxidation of solid-phase minerals after hydrothermal activity has ceased.

Chimney and fluid samples collection
Sulfide chimney samples were collected by ROV Jason at the 9-10°N deep-sea hydrothermal vent field on the East Pacific Rise (EPR) during research cruise AT26-10 (December 2013 to January 2014). One sample (named Lvent) was collected from the flange of an active chimney at the L-vent structure (104.2789°W, 9.7712°N), venting hydrothermal fluid with temperature of 231°C; the other one (named M-vent) was collected from a recently inactive chimney at the M-vent structure (104.2931°W, 9.8466°N) that became extinct as a result of the volcanic eruption in 2006 [5]. However, at the time of sampling in January 2014, the highly weathered M-vent chimney was found to emit warm fluid (35°C) at a low flow rate. Chimney pieces were placed in sealed bioboxes to prevent mixing with ambient seawater during the recovery. Both samples were kept at − 70°C immediately after sample retrieval on board and were then transported to the laboratory with dry ice and stored at − 80°C before analysis. Three fluid samples were collected from L-vent and two from M-vent using isobaric gastight fluid samplers (IGT) to maintain fluids at seafloor pressure [38]. During sampling, the IGT snorkel with a thermocouple at its tip was positioned directly into the chimney orifices. When the temperature achieved a stable reading, the inlet valve of the sampler was opened for 2 min and then closed to maintain in situ pressure during recovery.

Geochemistry measurements
Fluid samples were extracted from the retrieved IGT sampler for geochemical analysis either directly on board the ship (pH, CH 4 , H 2 , total dissolved sulfide) or upon return back to land in the shore-based laboratory (Mg 2+ , K + , Ca 2+ , Na + , Cl − ). The pH was measured at 25°C with an Ag/AgCl combination reference electrode. Dissolved CH 4 and H 2 concentrations were determined using a gas chromatograph equipped with a 5 Å molecular sieve packed column and serially connected thermal conductivity and flame ionization detectors following quantitative headspace extraction. Total dissolved sulfide (ΣH 2 S = H 2 S + HS − + S 2− ) was determined potentiometrically using a sulfide-selective electrode. Dissolved Mg 2+ , K + , Ca 2+ , Na + , and Cl − concentrations were analyzed by ion chromatography with suppressed conductivity detection.

16S rRNA gene reconstruction
Full-length 16S rRNA genes were reconstructed from clean reads of two metagenomes respectively by EMIRGE (v0.60.4) with default parameters and BLASTed against SILVA 123 SSURef_NR99 database with e values < 1 × 10 −10 for taxonomic information [43,44]. Relative abundance in phylum level (class level for Proteobacteria) is summarized based on the average sequencing depth of taxonomically assigned 16S rRNA genes from two samples, respectively.

Annotation and statistic comparison of functional genes
For contigs larger than 1 Kb, open reading frames (ORFs) were predicted and translated by using prodigal (v2.6.3) with -p meta parameters [45], and the resulting amino acid sequences were uploaded to webserver GhostKOALA (KEGG Orthology And Links Annotation) in genus_prokaryotes + family_eukaryotes database with default parameters for KO annotation [46]. For cross checking, potential key genes involved in further analysis were also annotated in eggNOG database through emapper-eggnog (v0.0.1) as well as in Pfam 31.0, TIGR-FAM 15.0, and custom databases via hmmsearch with cutoff e value < 1 × 10 −10 [47][48][49][50]. Specific key genes and their accession in different databases are listed in Additional file 2: Table S7.
To quantitatively compare key genes between the two chimney samples, reads mapped to each gene were recruited by using featureCounts (v.1.5.0) [51], which was normalized by gene length, and the normalized relative abundance of key genes was determined for two samples: Mapped reads to each gene Length of each gene Statistical tests of key genes involved in carbon, nitrogen, and sulfur metabolism between the two metagenomes were performed by pairwise comparisons of their abundance by using two-sided Fisher's exact test with confidence intervals at 95% significance using the Newcombe-Wilson method and Benjamini-Hochberg FDR multiple test correction in STAMP [52]. For those important catalytic genes, their taxonomy was assigned based on BLAST results in the NCBI NR database (updated in October 2018) with coverage > 50% and e value < 1 × 10 −10 . Taxonomic assignment was summarized at the phylum level (class for Proteobacteria). For each functional gene, taxonomic relative abundance is calculated based on the sum sequencing depth of genes with same taxonomic assignment in the total depth of this gene.

Phylogenetic analysis of functional genes
Dissimilatory sulfite reductase (dsr) catalyzes either the reduction of sulfate in sulfate-reducing microorganisms or the reverse reaction in sulfide-oxidizing bacteria [53]. Here, the phylogeny of dsrA was used to distinguish between the two types [54]. The retrieved dsrA sequences from the current study were aligned with all high-quality dsrA amino acid sequences downloaded from NCBI NR database on July 2018 using MAFFT (v7.313) [55]. Gaps in the alignment were trimmed by the trimalAI (v1.4) with -automated1 and checked manually [56]. A phylogenic tree was generated by using IQ-tree (v1.6.6) using parameters: iqtree -m LG+C60+F+G -alrt 1000 -bb 1000 [57]. A similar approach was taken to phylogenetically characterize the marker gene soxB of the multienzyme sulfur-oxidizing (Sox) system and the cyc2 gene.

Metagenomic binning
The binning method used here is modified from Wang et al [58]. Contigs larger than 3 Kb from the two metagenomes were included to independently recover MAGs using MetaBAT2 (v2.12.1) and Maxbin (v2.2.1) with default parameters [59,60]. The completeness and contamination of MAGs were estimated via CheckM (v1.0.9) with lineage-specific markers genes [61]. Because different independent automated binning methods reconstructed multiple similar MAGs from the same microbial taxa, we here used a modified method described in Park et al. to refine MAGs [62]. First, a pair of MAGs with identical taxonomic classification was combined into one single bin using the "merge" function of CheckM if integrated completeness and contamination would increase ≥ 10% and ≤ 1% respectively. Next, the contigs with divergent genomic properties (GC content, tetranucleotide and sequencing depth) and incongruent taxonomic classifications were filtered from their belonged MAGs by using the "outliers" method of Refi-neM (v0.0.22) [63]. Then, average amino acid identity (AAI) was calculated between each refined bin with CompareM (v0.0.23) (https://github.com/dparks1134/ CompareM). We kept the one with higher completeness if two MAGs share AAI ≥ 99%. After filtering the reduplicate contigs in multiple MAGs, we kept qualified MAGs with completeness ≥ 70% and contamination ≤ 9% based on the evaluation from CheckM with parameter lineage-specific.

Taxonomic assignment of MAGs
Qualified MAGs from two samples were phylogenetically assigned to appropriate taxonomic classifications based on a set of 37 concatenated universal single-copy protein sequences [63]. The reference genome dataset was downloaded from NCBI genome database in February 2018, including all available archaeal genomes and selected bacterial genomes with at least 10 from each order. Then, 37 marker genes were predicted in every reference genome and MAG by using reciprocal BLAST in the COG database, which was aligned separately by MAFFT (v7.313) with auto parameter and trimmed using trimalAI (v1.4) with automated1 [55,56]. Phylogenetic tree was generated using RAxML (v8.2.8) with PROTGAMMALG model and 1000 bootstraps replicates [64]. The resulting phylogenetic tree was visualized using the Interactive Tree Of Life (iTOL) webtool [65]. In addition, further phylogenetic analyses were carried out for the MAGs assigned to Nitrospirae, Gammaproteobacteria, and Campylobacteria, respectively.

Coverage, relative abundance, and replication rate of MAGs
The coverage of recovered MAGs in the communities were estimated through a method based on the unique marker gene RpS3 [66], which were retrieved from these two chimney metagenomes by using hmmsearch (cutoff e value 1 × 10 −10 ) in the Pfam 31.0 database [50]. Relative abundance for each MAG is determined by the proportion of length normalized depth of their binned contigs in all of contigs larger than 3 Kb. Index of replication (iRep) value is a quantitative measurement of the in situ replicate rates of bacterial MAGs based on their single-origin replication feature and sequencing coverage trend, which is a function of replicating population and number of replicate events [67]. Here, we determined the iRep value for those bacterial MAGs with ≤ 175 scaffolds per Mb by using the official script (https://github. com/christophertbrown/iRep).

Metabolic analysis of MAGs
All retrieved MAGs were annotated by using eggnog-mapper-1.03 in the EggNOG database with e value < 1 × 10 −10 , which were further cross checked in the Pfam 31.0, TIGRfam 15.0, and custom hmmer databases with e value 10 −10 . Hydrogenases were predicted and classified based on hydrogenase classifier HydDB by using hmmsearch (e value cutoff < 1 × 10 −10 ) [68]. After assignments of key genes, MAGs were assessed for the completeness of specific pathways and functions based on the canonical pathways available in KEGG Pathway Database (www.kegg.jp). The aerobic CO dehydrogenase (CODH) shares a high similarity with other enzymes from molybdenum hydroxylase family [69]. To prevent an overestimation of the potential for CO oxidation, we performed similar phylogenetic analysis for its catalyzed subunit coxL to confirm the presence of CODH in each MAG using previously compiled reference sequences from COoxidizing bacteria [69].

Geochemical features of hydrothermal fluids
The measured temperature of the hydrothermal fluid discharged from the L-vent and M-vent chimney were 231°C and 35°C, respectively. Measured concentrations of dissolved chemical species in individual vent fluid samples are provided in Additional file 2: Table S1. For the L-vent, the composition of the three IGT fluid samples showed significant variability in the concentration of Mg, indicative of variable degrees of inadvertent seawater entrainment during sample collection. The composition of the endmember fluid at L-vent (Table 1) was calculated by plotting the concentration of a given chemical species against the measured Mg concentration in the same sample and extrapolating to zero-Mg, as is typically done for high-temperature submarine vent fluids [70]. Measured concentrations of Mg in the two fluids collected at M-vent showed little variation, consistent with entrainment of seawater in subseafloor environments prior to venting. Because we are interested in the chemical composition of fluids accessible to vent communities living within the chimney structures, the composition of M-vent fluids reported in Table 1 are not extrapolated to zero-Mg endmember values. At both vents, reported pH (25°C) is the lowest measured value in the samples and is not extrapolated to zero-Mg.
Endmember fluids venting through the L-vent structure were characterized by dissolved sulfide and H 2 concentrations of 6.3 and 0.83 mM, respectively. In contrast, fluids exiting M-vent contained 0.00042 mM sulfide and H 2 was below the detection limit of 2 μM. CH 4 was also detected in both the L-vent and M-vent fluids at concentrations of 83 and 24 μM, respectively. Despite the stark difference in temperature, the measured pH (25°C) showed similar values of 4.8 and 5.2, respectively ( Table 1).

Distribution of key metabolic genes
Key genes for microbial carbon, nitrogen, and sulfur metabolisms were searched in the metagenomes of the two chimneys, and differences were revealed regarding gene inventories and the pathways utilized by these two communities (Fig. 2).

Carbon fixation
Genes encoding for the ATP-citrate lyase (aclA/B), the key enzyme of reductive tricarboxylic acid (rTCA) cycle, were identified in significantly higher abundance (P value < 0.05) in the active L-vent sample compared to M-vent (Fig. 2a), and more than 99% of them share high similarities with those from Campylobacteria and Aquificae (Additional file 1: Figure S1a). In contrast, genes encoding enzymes of the Calvin-Benson-Bassham (CBB) cycle (rbcL/S and PRK) are significantly enriched in the inactive M-vent chimney, and the majority (43% of rbcL; 86% of rbcS and 75% of PRK) are assigned with Gammaproteobacteria (Additional file 1: Figure  S1b). For the Wood-Ljungdahl (WL) pathway, genes encoding for the delta subunit of the archaeal acetyl-CoA decarbonylase/synthase complex (cdhD) Fig. 1 Taxonomic composition of microbial communities from the active L-vent chimney (a) and recently inactive M-vent chimney (b). Numbers in the pie charts represent percentages of each taxonomic unit in class level, which are estimated based on the full-length 16S rRNA genes retrieved from the two metagenomes. Detailed information is displayed in the Additional file 2: Table S3 and S4 and for the bacterial acetyl-CoA synthase (acsB) were more prevalent in the M-vent community, while the genes encoding for the alpha, beta, and epsilon subunits of the archaeal acetyl-CoA decarbonylase/synthase complex (chdA, cdhC, and cdhB, respectively) were present in higher abundances in the L-vent community (Fig. 2a).

Nitrogen metabolism
Genes encoding the periplasmic nitrate reductase (napA/B) and membrane-bound nitrate reductase (narG/H) were identified in both L-and M-vent samples, but with distinctly different abundances (Fig. 2b).
In the M-vent chimney, narG/H were significantly enriched, with 43% of narG assigned to Alphaproteobacteria (Additional file 1: Figure S1b), while napA/B were more enriched in the active L-vent chimney, with 98% of napA assigned to Campylobacteria and Aquificae (Additional file 1: Figure S1a). Genes of the dissimilatory nitrate reduction to ammonia (DNRA) pathway were more abundant in the inactive M-vent chimney, with 74% of nitrite reductase large subunit (nirB) assigned to the Gammaproteobacteria (Additional file 1: Figure S1b). For the denitrification pathway, the gene encoding for the beta subunit of the nitric oxide reductase (norB) and for the nitrous-oxide reductase (nosZ) were identified in significantly higher abundance in the active L-vent chimney compared to M-vent (Fig.  2b), with the majority of them assigned to Campylobacteria and Aquificae (Additional file 1: Figure S1a; 80% of norB and 75% of nosZ). On the other hand, the M-vent community was more enriched in genes encoding for subunits of the nitrogenase (nifD/K/H), which is involved in N 2 -fixation, compared to L-vent (Fig. 2b), with 43% of nifH being assigned to Nitrospirae (Additional file 1: Figure S1b).

Sulfur metabolism
A significantly higher abundance of genes encoding for adenylylsulfate reductase (aprA/B) and sulfite reductase (dsrA/B) were identified in the M-vent sample (Fig. 2c). Particularly, most aprA/B were taxonomically assigned to Gamma-and Deltaproteobacteria (Additional file 1: Figure S1b; 60% of aprA and 68% of aprB). Since the majority of dsrA/B were assigned to unclassified species, we inferred the taxonomy and catalytic type of dsrA based on their phylogenies. The results suggest that 13 of 14 dsrA presented in the L-vent were of the reductive type, including Deltaproteobacteria, Archaeoglobus, and Acidobacteria, while 36 of 72 dsrA genes from M-vent were of the oxidative type belonging to sulfur-oxidizing Alpha-and Gammaproteobacteria, with the remainder being of the reductive type belonging to Deltaproteobacteria (10), Nitrospirae (12), and Acidobacteria (14) (Additional file 1: Figure S2). For the Sox sulfur oxidation system, similar abundances were found for soxB from Land M-vent; however, the majority of soxB from L-vent were assigned to Aquificae and Campylobacteria, while those from M-vent were largely assigned to Gammaand Alphaproteobacteria (Additional file 1: Figure S3). On the other hand, soxA/C/Y/Z were found highly enriched in the active L-vent chimney, most of which (95%) were assigned to the Aquificae and Campylobacteria (Additional file 1: Figure S1a). Additionally, genes encoding for the sulfide-quinone oxidoreductase (sqr) were present in higher abundance in the L-vent community, with a similar taxonomic profile as the sox genes (Additional file 1: Figure S1a).

Phylogeny of MAGs
After filtration of low-quality MAGs, 71 and 102 MAGs with a completeness ≥ 70% and potential contamination ≤ 9%, which is higher than the MAG medium quality standard proposed by Genomic Standard Consortium (https://gensc.org/), were obtained for further analysis from L-and M-vent metagenomes, respectively (Additional file 2: Table S5). For L-and M-vent, 42.3% and 48.3% of reads were retrieved to their respective MAGs. Based on the sequencing depth, 20 and 34 of the top 50 most abundant RpS3 genes were identified in the MAGs recovered from L-and M-vent, respectively, including the top three of the L-vent community and the most and third most abundant taxa of M-vent (Additional file 1: Figure S4). Therefore, the retrieved MAGs are representative of the majority of microbial taxa of both communities.
Overall, the 173 retrieved MAGs could be taxonomically assigned to more than 20 phyla, including several novel candidate bacterial phyla without cultivated representatives (Fig. 3). Relative abundance and major groups (> 1%) and individual MAG were shown in Additional file 2: Table S6 and S10. Particularly, for the 71 MAGs from the L-vent chimney, 11 MAGs were taxonomically assigned to the phylum Aquificae, which was identified as the dominant taxon (14.5%) based on their reads mapped to the whole L-vent metagenome. Four MAGs of Thermodesulfobacteria were the second most abundant bacterial group (8.0%). Seventeen MAGs belonged to Camplyobacteria representing only 3.6% of the whole microbial community; this discrepancy to the 16S rRNA gene-based results is probably due to their high interspecies diversity and similar genomic features making it difficult to retrieve more MAGs. Chloroflexi (5 MAGs), FCB group (7 MAGs), Gammaproteobacteria (4 MAGs), and Thermotogae (2 MAGs) accounted for 2%, 1.7%, 1.5%, and 1.1%, respectively. For Archaea, 4 and 8 MAGs were assigned to the phyla Euryarchaeota and Crenarchaeota, representing 4.6% and 2.8%, respectively (Additional file 2: Table S6). Phylogenetic analysis indicated that 3 out of 4 Euryarchaeotal MAGs belonged to the methanogenic classes Methanococci and Methanopyri and most of the Crenarchaeota were distantly related to Ignicoccus (Additional file 1: Figure S8). Moreover, 4 MAGs were classified as DPANN groups, including Micrachaeota (2), Diapherotrites (1), and Nanohaloarchaeota phyla (1).
For the M-vent sample, 16 Gammaproteobacteria MAGs accounted for 11.4% of the whole community, most of which were assigned to Ca. Tenderia electrophaga and also closely related to those recovered from previously analyzed inactive chimneys (Additional file 1: Figure S7) [37]. Eleven Deltaproteobacterial MAGs were recovered with a total relative abundance of 4.9%. In addition, FCB group (11 MAGs; 4.99%), Calditrichaeota (6 MAGs; 3.72%), Alphaproteobacteria (7 MAGs; 2.77%), Nitrospirae (6 MAGs; 2.94%), PVC group (9 MAGs; 4.35%), and Acidobacteria (4 MAGs; 2.57%) were represented as major microbial groups among the MAGs of the M-vent microbial community. Phylogenetic analysis showed that the 4 out of the 6 Nitrospirae MAGs could be assigned to a newly identified "sulfide-mineral" clade, along with 5 additional MAGs either from inactive sulfide chimneys or subseafloor massive sulfides (SMS) [37,71] (Fig. 3), while the other 2 Nitrospirae MAGs were part of a separate clade (Additional file 1: Figure S6). The genome tree further showed that Nitrospirae are split into two distinct lineages with long phylogenetic distance (Fig. 3), in line with the polyphyletic feature of Nitrospirae reported before [62], highlighting the need to reclassify this phylum. In addition, 3 MAGs were assigned to novel taxa in the candidate phyla radiation (CPR) and 2 MAGs were assigned to the phylum Micrachaeota in DPANN group.

Index of replication value (iRep) of bacterial MAGs
The iRep value provides information about the replication activity of specific MAGs at the time of sampling (see the "Material and methods" section). Theoretically, a iRep value of 1.5 means that half of the cells in a population are replicating, but in reality, there are several ways to achieve a given iRep value since the population is heterogeneous, i.e., some cells may not replicate and others are replicating at a faster rate with more than one replication fork [67]. In this study, most of the retrieved bacterial MAGs in the chimneys represent active replicating bacterial taxa as indicated by iRep values calculated from 52 and 91 high-quality bacterial MAGs from the L-and M-vent samples, respectively. The average iRep value of bacterial MAGs from the inactive M-vent is 1.51, which is higher than that from the active L-vent (1.42) (Additional file 2: Table S6). In the L-vent, Camplyobacteria had the highest average iRep value (1.52), followed by Chloroflexi (1.5), Gammaproteobacteria (1.47), Thermodesulfobacteria (1.43), and Aquificae  Fig. 4 and Additional file 2: Table S6, respectively.

Metabolic reconstruction of MAGs
The active L-vent chimney Based on the analysis of MAGs, the Campylobacteria (17 MAGs) and Aquificae (11 MAGs) dominating the active L-vent are potential sulfur/hydrogen-oxidizing bacteria with capabilities of denitrification and carbon fixation through the rTCA cycle (Fig. 4). All 28 MAGs encode at least one sqr gene; 45% and 24% of them also encode complete or near complete Sox system ( Fig. 4; Additional file 2: Table S6). The rTCA cycle is the sole carbon fixation pathway and was prevalently identified in the Aquificae and Campylobacteria MAGs (55% and 47%, respectively). In addition, the majority of Aquificae and Campylobacteria MAGs encode hydrogenase groups 1 and 2 for hydrogen uptake. Further, napA/B genes were identified in every MAG assigned to Campylobacteria and 45% of Aquificae MAGs. Genes encoding for the enzymes catalyzing the subsequent steps of denitrification (nirS/K, norB/C, nosZ; Additional file 2: Table  S7) were identified in 73% and 47% of the MAGs belonging to the Aquificae and Campylobacteria, respectively ( Fig. 4; Additional file 2: Table S6). Differentially shaded tiles represent the completeness of displayed metabolic pathways, including none, partial, incomplete, and complete four levels. There are only two levels (encode or not) for cyc2 and genes involved in fermentation. The specific key genes and completeness definition involved in each metabolic pathway could find in Additional file 2: Table S7 Besides Aquificae and Campylobacteria, 4 MAGs (8.2%) belonging to the Thermodesulfobacteria were identified in the L-vent chimney that have the capacity of reducing multiple sulfur species. They contained not only the key genes encoding the complete sulfate reducing pathway (i.e., sat, aprA/B and dsrA/B), but also other essential marker genes like dsrD, the sulfite reductase-associated electron transfer complex (dsrM/K/ J/O/P), and the electron transfer complex (QmoA/B/C) (Additional file 2: Table S8). Moreover, genes encoding for the thiosulfate reductase (phsA/B) and tetrathionate reductase (ttrA) were also identified in 2 of them. Thermodesulfobacteria MAGs from L-vent chimney share highly similar metabolic potential with their sulfurdisproportioning isolates [72].
We also identified 2 MAGs belonging to the phylum Euryarchaeota that contained the complete gene cluster encoding for the methyl coenzyme M reductase mcrABG and also genes encoding for the Group 3/4 hydrogenase, indicating a methanogenic metabolism ( Fig. 4; Additional file 2: Table S6). The other major microbial groups, such as Chloroflexi and the FCB group, have organotrophic potential, either using fermentation or respiration, which is supported by the considerable number of genes related to carbohydrate degradation and nitrate reduction (Fig. 4).

The recently extinct M-vent chimney
Based on the analysis of MAGs, the Gammaproteobacteria (16 MAGs) dominating the M-vent chimney are potential chemoautotrophic sulfur-oxidizing bacteria, using the CBB cycle for carbon fixation and reducing nitrate via the DNRA pathway (Fig. 4). For sulfur oxidation, most of the MAGs contained the genes encoding for the Sox system (69%) and sqr gene (63%) (Fig. 4; Additional file 2: Table S6). In addition, 50% of the MAGs also contain the gene encoding for the reverse DSR as evidenced by the phylogenetic assignment of the dsrA gene (Additional file 1: Figure S2), indicating the potential for the oxidative DSR pathway for sulfur oxidation. Moreover, 5 of these MAGs also contain the cyc2 gene encoding for an outer membrane c-type cytochrome, which is closely related with their expressed homologs in the electroautotrophic Ca. Tenderia electrophaga (Additional file 1: Figure S9).
Deltaproteobacteria (11 MAGs) were identified as one of the major microbial taxa in the M-vent chimney. Based on their gene content, they are putative sulfatereducing bacteria (SRB) having the potential to oxidize organic matter through the WL pathway, with 64% of the MAGs encoding the reductive DSR pathway and WL pathway. Specifically, genes involved in carbohydrate degradation are significantly enriched in the Deltaproteobacteria (19.2 CAZyme genes per MAG on average; Additional file 2: Table S6). Based on the identification of genes encoding for napAB/narGH and the subsequent DNRA pathway in most of their MAGs, nitrate appears to be a potential alternative electron acceptor for Deltaproteobacteria.
The 4 Nitrospirae MAGs recovered belonging to the "sulfide-mineral" clade encode essential genes of DSR, WL pathway, nitrite reduction and nitrogen fixation, same as the other 5 MAGs in this clade ( Fig. 4; Additional file 2: Table S9). Three of them encode the key enzyme of cbb3-type cytochrome c oxidase (Additional file 2: Table S10). Furthermore, 5 of all 9 Nitrospirae from the "sulfide mineral" clade (including the 2 most abundant recovered from the M-vent and the other 3 derived from recently extinct sulfide chimneys and SMS, respectively [37,71]) encode the cyc2 gene (Additional file 2: Table S9). Their cyc2 genes are phylogenetically closely related to each other and distantly related to their counterparts identified in the genomes of Zeta-/ Betaproteobacteria Fe-oxidizing bacteria (FeOB) [73] (Additional file 1: Figure S9). Moreover, these "sulfide mineral" Nitrospirae MAGs have relatively small genomes (< 2 Mb) and fewer genes involved in sulfur oxidation pathways (sqr and sox) compared with other Nitrospirae species (Additional file 2: Table S9). Besides the 4 MAGs assigned to the "sulfide mineral" clade, the other two Nitrospirae MAGs recovered from the M-vent have distinct metabolic features: one does not have any genes involved in sulfate reduction; the other one encodes the rTCA pathway instead of the WL pathway and is closely related with another metabolically similar Nitrospirae MAG recovered from a long-time inactive sulfide chimney [37] (Additional file 2: Table S9).
Based on the prevalence of genes encoding for narGH, napAB, and the subsequent DNRA pathway (nrfA/H, nirB, and nirD; Additional file 2: Table S7) in their genomes, other microorganisms in the M-vent chimney including the FCB group, PVC group, Calditrichaeota, Alphaproteobacteria, Chloroflexi, and Actinobacteria are likely to be nitrate-respiring heterotrophs (Fig. 4). That is also supported by the enrichment of genes for carbohydrate degradation (CAZyme) identified in their MAGs, especially for the Calditrichaeota, FCB, and PVC group (Fig. 4). Interestingly, some Calditrichaeota (1 in 6 MAGs), Alphaproteobacteria (2 in 7 MAGs), and Actinobacteria (2 in 3 MAGs) encode carbon monoxide dehydrogenase (coxM/L/S) which catalyzes CO oxidation. The phylogenetic analysis of coxL from M-vent suggests that they are largely assigned to the putative FormII/ BMS clade (Additional file 1: Figure S5). The Euryarchaeota MAGs recovered from M-vent are potential sulfate reducing archaea that are phylogenetically closely related to the Archaeoglobi lineage, which is supported by the retrieved 16S rRNA gene of the genus Geoglobus (Additional file 2: Table S4). Three of the 4 MAGs encode the complete reductive DSR pathway, the archaeal WL pathway, as well as group 1 hydrogenase (Fig. 4; Additional file 2: Table S6).

Discussion
Microbial communities inhabiting hydrothermal sulfide chimneys are largely shaped by the local geochemical, physical, and geological conditions, and consequently, the taxonomy and metabolic capabilities vary with the development of sulfide chimneys [33][34][35][36][37]. Due to the unpredictable nature of volcanic eruptions combined with sampling challenges, it has proven difficult to follow and investigate the succession of microbial communities of a sulfide chimney from its creation to extinction. Here, we present the first reported metagenome from an inactive sulfide chimney that went extinct at a precisely known time after a volcanic eruption in 2006, making it significant to understand the microbial succession taking place during the initial transition from an active chimney to an inactive one. Moreover, we also retrieved and deciphered 173 high quality MAGs from both chimneys, which provide genomic insights into the metabolic functions and ecological roles of these microbes. Combining data obtained in the present study with those published previously (including studies from Guaymas Basin, East Pacific Rise 9°/13°N, Mid-Atlantic Ridge, Main Endeavor Field, Loki's Castle vent field; as well as some in situ incubations and lab enrichments, details see Additional file 2: Table S11), we are proposing a conceptual model to understand the pattern of microbial succession: microbes in the sulfide chimney shift from a "fluid-shaped" community supported by electron donors in the fluid into a "mineral-shaped" one supported by solid-phase electron donors during the lifetime of a vent from initiation to extinction (Fig. 5). Enrichments in Ca 2+ and K + and depletions in Mg 2+ and SO 2− 4 relative to seawater in the M-vent fluid (Table 1) are consistent with its composition being regulated by subsurface fluid-rock reactions similar to those responsible for the formation high-temperature (300-400°C) fluids venting in the vicinity of 9°50′ N EPR. Measured Mg 2+ and SO [2][3][4] concentrations, however, did not approach zero as is typically observed for hightemperature vent fluids and were accompanied by a temperature of only 35°C, indicating mixing with cold seawater and conductive cooling had occurred in subseafloor environments. In response to abiotic and biotic processes following subsurface mixing and cooling, the M-vent fluids are highly depleted in dissolved H 2 and H 2 S relative to what would be expected for conservative mixing of a high-temperature (~350°C) endmember fluid and seawater. Consequently, H 2 and H 2 S, two key electron donors that participate in a variety of metabolic processes, have extremely limited availability to support chimney ecosystems. In contrast to M-vent, the L-vent fluids have substantially higher measured temperatures and deliver abundant H 2 and H 2 S to chimney environments at levels typical of high-temperature hot springs at EPR. The "fluid-shaped" microbial community A few studies on the microbial pioneers colonizing a nascent chimney are all based on in situ or simulated incubation experiments, suggesting that microbes colonize the initially sterile sulfide structures quickly, and get established within a short period of time (< 14 days) [74][75][76][77][78][79]. Hyperthermophiles, including Methanocaldococcus and Ignicoccus species together with its symbiont Nanoarchaeum, were identified as the dominant pioneer microorganisms of freshly formed chimneys [77,78,80]. In the present study, these putative archaeal pioneers were also identified in the active L-vent chimney, including one Methanocaldococcus-like MAG in considerable abundance (3.8%; Fig. 4). Metabolic reconstruction suggests that these uncultured organisms have the ability to utilize H 2 as an electron donor for methanogenesis (Methanocaldococcus) and sulfur reduction (Ignicoccus), in line with the metabolism of their cultured hyperthermophilic deep-sea vent relatives Methanocaldococcus and Ignicoccus (Fig. 4) [81,82]. In view of their requirement for H 2 , high temperature, and anoxic conditions, these hyperthermophilic archaea are likely present in the interior layers of the chimney, where these pioneers are expected to consistently contribute to the primary production throughout the lifetime of an active chimney [83,84] (Fig. 5a).
During the development of a sulfide chimney, available spatial, redox, and thermal gradients for microorganisms are expanding with accumulating mineral deposits along with the oxidative weathering from seawater. Colonization is followed by the thermophilic Aquificae and thermophilic and mesophilic Campylobacteria, which colonize the relative cooler exterior layers of the chimney wall and often form massive biomats covering the chimney exterior [20,21]. For example, the Campylobacteria quickly became the dominant community members after 5 days inside the growth chamber of an in situ incubation device [79], sharing high similarity with the taxonomic profile of most investigated mature sulfide chimneys, including L-vent [16-19, 22, 23, 85, 86]. Undoubtedly, H 2 from venting fluids is the most important electron donor during the early microbial succession stage, not only for archaeal pioneers, but also for the following Aquificae and Campylobacteria in the mature stage (Fig. 4). Subsequently, oxidation of H 2 S and other reduced sulfide compounds contained in the fluid become important energy sources, as evidenced by the prevalence of genes involved in sulfur oxidation, like sqr and the Sox system, identified in most MAGs assigned to these and other bacterial chemolithotrophs (Figs. 2  and 4). Both H 2 S and H 2 are abundantly available in the vent fluids at L-vent to support chemoautotrophs in the chimney wall (Table 1) In addition, the potentials for aerobic respiration and denitrification indicate that the Aquificae and Campylobacteria are able to utilize oxygen and nitrate from seawater percolating through the chimney as electron acceptors, further implying that they inhabit the relative outer layers and exterior of the chimney wall. In short, hydrothermal fluid chemistry largely controls the primary microbial colonization in newly formed chimneys and shapes the microbial community within sulfide chimneys from the initial to the mature stages (Fig. 5a, b).
The "mineral-shaped" microbial community During the transition phase from a mature to an inactive sulfide chimney, a "fluid shaped" microbiome as described above is expected to shift to a "mineral-shaped" community ( Fig. 5c, d). First, the decrease in temperature plays a key role in shaping the microbial community, changing from one dominated by thermophiles to one dominated by mesophiles and finally psychrophiles. This is well supported by the distinct differences between active and inactive sulfide chimneys extinct for > 1000 years, i.e., a community dominated by the Aquificae and Campylobacteria on one hand and an assemblage of the Gamma-/Delta-/Alphaproteobacteria and Bacteroidetes on the other hand [4,[33][34][35]84]. Although the M-vent chimney went extinct only 7 years prior to sampling, the overall microbial composition was highly similar to those chimneys that had been extinct for much longer time periods [33,[35][36][37]. This suggests that the microbial succession takes mainly place during the early stages after venting ceases and that the microbial community then stays relatively stable over long periods of time of up to thousands of years.
Along with the diminishing hydrothermal fluids, available energy sources for chemoautotrophs supporting the DSHV ecosystem gradually shift from reduced chemicals contained in the vent fluids (mainly H 2 and H 2 S) to the sulfide minerals making up the chimneys. Besides temperature, this is another critical factor in driving microbial succession at the taxonomic and metabolic level once venting ceases. First of all, the Gammaproteobacteria are inferred to replace the Campylobacteria and Aquificae as the major primary producers during this process, instead fixing CO 2 via CBB cycle and retrieving energy from mineral sulfides through multiple sulfur oxidation pathways (reverse DSR, Sox system and sqr). The prevalence of the cyc2 gene identified in their MAGs suggests that, besides sulfide, Fe 2+ from minerals (like pyrite and pyrrhotite) likely serves as an alternative electron donor for these autotrophs. This gene encodes an outer membrane cytochrome c, which was demonstrated to mediate iron oxidation in the acidophilic FeOB Acidithiobacillus ferrooxidans and has also been found in all available genomes of neutrophilic FeOB and has been proposed as a candidate genetic marker for FeOB [73,87,88]. Moreover, a highly expressed cyc2 gene identified in the electroautotrophic Ca. Tenderia electrophaga, which is phylogenetically closely related to the cyc2 genes identified in the MAGs (Additional file 1: Figure S9), has been inferred to be involved in extracellular electron transfer (EET) [89]. Therefore, this suggests that the Gammaproteobacteria identified in Mvent have the potential to use EET to oxidize Fe 2+ contained in sulfide minerals, like pyrite and pyrrhotite, that make up the chimney structure. In support of this hypothesis, Thiomicrospira sp. SC-1, a FeOB recently isolated from an in situ incubation with pyrrhotite, has been shown to grow autotrophically with iron oxides and sulfur intermediates [30,90]. Thus, by utilizing the oxidation of metal sulfides as an energy source, these putative chemolithoautotrophic Gammaproteobacteria very likely play essential roles in supporting the ecosystem of inactive sulfide chimneys for thousands of years after cessation of venting [33][34][35][36], similar to the role of Aquificae and Campylobacteria in active chimneys. Besides the Gammaproteobacteria, cyc2 genes were also identified among many other bacterial taxa in the inactive M-vent chimney, including Alpha-/Deltaproteobacteria, Nitrospirae, and FCB group ( Fig. 4; Additional file 1: Figure S9). Previously, cyc2-containing chemolithotrophic Alpha-/Betaproteobacteria have been shown to accelerate aerobic pyrite oxidation in freshwater sediments and Alphaproteobacteria were also identified in pyrrhotite incubation experiments as dominant members [90,91]. Thus, our results imply that the capability to oxidize iron sulfides for chemolithotrophic growth may be widespread among microbes living in inactive chimneys.
Generally, putative heterotrophic bacteria dominating the M-vent and other inactive chimneys, like Alpha-/ Deltaproteobacteria, Chloroflexi, PVC, and FCB group, have also been widely identified in active chimneys, although generally with much lower relative abundances [16,18,85,[92][93][94]. Thus, the increasing abundance of heterotrophs in inactive chimneys suggests that they probably already colonized the exterior of actively venting chimneys, and then gradually became more prevalent with diminishing hydrothermal activity. The iRep values indicate that these heterotrophic bacteria are actively replicating in situ, which is consistent with the previous observation of significant enzymatic activity in inactive chimneys [34]. Prevalent cytochrome c oxidase genes identified in most of MAGs from the M-vent suggest that oxygen is very likely a widespread electron acceptor for microbial communities inhabiting inactive sulfide chimneys (Additional file 2: Table S10). Interestingly, compared with the active L-vent chimney, our results further revealed that the metabolic potential for sulfate reduction was more prevalent in the M-vent chimney, both at the gene and genomic level (Figs. 2 and 4). This suggests that sulfate might be an important electron acceptor for the majority of microorganisms in the M-vent chimney. In view of the fact that membrane-bound nitrate reductase encoded by nar is more efficient than the nap-encoded periplasmic nitrate reductase at high nitrate concentrations [95], the higher frequency of nar gene observed in the M-vent possibly reflects the microbial adaption to the increased accessibility of nitrate, implying that the intrusion of seawater plays an important role in the microbial succession after venting ceases.
Based on 16S rRNA gene analysis, Nitrospirae was one of the major taxa (17.3%) identified in the recently extinct M-vent chimney (Fig. 1), in contrast to previous studies that have rarely reported this group as one of the dominant taxa in either active or extinct sulfide chimneys [16,22,76,85,93,96]. The only exceptions besides the present study are two recently described inactive chimneys, one of them being a relatively young inactive chimney (0 ± 160 years) and the other one a much older inactive chimney (~2093 years) with Nitrospirae making up 83% and 38% of the community, respectively [37]. Furthermore, the 7-year old inactive M-vent chimney and the younger inactive chimney described by Meier et al [37] share similar dominant Nitrospirae phylotypes within a unique "sulfide-mineral" clade that is distant from the Nitrospirae-1 phylotype dominating in an older inactive chimney as well as other Nitrospirae lineages [37] (Additional file 1: Figure S6). This suggests that the Nitrospirae "sulfide-mineral" clade flourishes in the early stage of inactive sulfide chimneys, making them a potential marker microorganism for young, recently extinct sulfide chimneys. Meier et al [37] propose that mineral sulfate, like anhydrite and/or barite, serves as a potential electron acceptor for Nitrospirae inhabiting young inactive chimneys [37]. While our data support this hypothesis, the finding of cyc2 genes in the "sulfidemineral" clade further suggests that the oxidation of Fe 2+ might also play an important role for these unique Nitrospirae enabling them to thrive in young inactive chimneys. Given that the cyc2 gene has been described to be involved in the oxidation of external electron donors, such as iron [73,87,89], the transferred electrons are very likely coming from the metal sulfides making up inactive sulfide chimneys. In addition, a Nitrospirae MAG belonging to the "sulfide mineral" clade was previously recovered from a subsurface massive sulfide (SMS) deposit in the Southern Mariana Trough [71] (Additional file 1: Figure S6), suggesting that there are common environmental features between recently inactive chimneys and SMS, such as the preservation of metal sulfide minerals that are not yet fully oxidatively weathered by permeating seawater. In addition, genes encoding cbb3-type cytochrome c and nitrite reductase were identified in most Nitrospirae MAGs belonging to the "sulfide-mineral" clade (Additional file 2: Table S9 and S10), implying that oxygen and nitrite might be potential electron acceptors for conserving energy via chemolithotrophic iron oxidation (Fig. 5). Thus, sulfide mineral utilization might be a key factor allowing these Nitrospirae to thrive in recently inactive sulfide chimneys, whose decay by oxidative weathering is largely proportional to the age of the inactive chimney, but is also controlled by their particular mineralogical and geological properties.

Conclusions
Here, the metagenome of a sulfide chimney that became recently inactive (~7 years prior to sampling) is being compared with an actively venting chimney from the same hydrothermal vent field located on the East Pacific Rise at 9-10°N. Their microbial communities have distinct compositional structures and energy-yielding metabolic potentials, indicating that the changes of the microbial community are largely driven by the available energy sources that shift from venting fluids to the mineral phase as the hydrothermal activity diminishes. Based on the results presented here, the transition from a "fluid-shaped" to a "mineral-shaped" community occurs within years after venting ceases, after which the communities stay stable for thousands of years. We could further identify a unique "sulfide-mineral" Nitrospirae clade, making it a potential marker microorganism for young, recently extinct sulfide chimneys. More sampling and further experiments are needed to elucidate the specific ecological significance of this clade during the succession from active to inactive chimneys, as well as the mechanisms involved in oxidation of sulfide minerals and the utilization of sulfate minerals as an electron acceptor.

Supplementary information
Supplementary information accompanies this paper at https://doi.org/10. 1186/s40168-020-00851-8.  Figure S2 Maximum-likelihood phylogeny of dsrA genes retrieved from L-vent and M-vent chimney. The red branches represent the dsrA genes recovered from active the L-vent chimney, while the blue ones are those from recently inactive M-vent chimney. Numbers of dsrA gene for each sample are displayed in the parenthesis after the clade name. Figure S3 Maximum-likelihood phylogeny of soxB genes retrieved from L-vent and M-vent chimney. The red nodes represent the soxB genes recovered from the active L-vent chimney, while the blue ones are those from the recently inactive M-vent chimney. Four soxB genes from M-vent chimney form a distinct clade (marked with red star) that different with other soxB. Figure S4 Distribution and quantity of top 50 RpS3 genes retrieved in the MAGs for two chimney samples. (a) in the active L-vent chimney. (b) in the recently inactive M-vent chimney. The x-axis represents each RpS3 gene identified in two samples, the y-axis is the sequencing depth for each RpS3 gene. The red bars indicate the RpS3 genes identified in the MAGs in corresponding samples, while the blue ones are those are not included in the MAGs. Figure S5 Maximum-likelihood phylogeny of coxL genes retrieved from L-and Mvent chimney. The red branches represent the coxL genes recovered from active the L-vent chimney, while the blue ones are those from recently inactive M-vent chimney. Support for internal nodes was constructed from 1000 bootstrap replicates, black dots represent those nodes with bootstrap value > 75%, which is direct proportional to their diameter. Figure S6 Phylogeny of 6 Nitrospirae MAGs recovered from M-vent chimney. The phylogenetic tree is based on 37 concatenated ribosomal proteins and collapsed at the genus level. The red nodes represent those MAGs recovered from M-vent chimney, the green ones are those from subseafloor massive sulfide deposits [71] and the organe ones are those retrieved from inactive chimneys [37]. The green-shaded branches are proposed as "Sulfide mineral" clade of Nitrospirae in this study. Figure S7 Phylogeny of 20 Gammaproteobacteria MAGs recovered from M-and Lvent chimney. The phylogenetic tree is based on 37 concatenated ribosomal proteins and collapsed at the genus level. The red nodes represent those MAGs recovered from L-vent chimney, and blue for M-vent chimney. The organe ones are those retrieved from inactive chimneys [37]. Figure S8 Phylogeny of 8 Crenarchaeota MAGs recovered from L-vent chimney. The phylogenetic tree is based on 37 concatenated ribosomal proteins and collapsed at the family level. The red nodes represent those MAGs recovered from L-vent chimney. Figure S9 Maximum-likelihood phylogeny of cyc2 genes retrieved from L-and M-vent chimney. The red branches represent the cyc2 genes recovered from the active L-vent chimney, while the blue ones are those from recently inactive M-vent chimney. the green ones are those from subseafloor massive sulfide deposits [71] and the organe ones are those retrieved from inactive chimneys [37]. The other reference sequences are come from Kato et al., 2015 [71]. Support for internal nodes was constructed from 1000 bootstrap replicates, black dots represent those nodes with bootstrap value > 70%, which is direct proportional to their diameter.
Additional file 2: Table S1 Measured concentrations of selected aqueous species and pH in replicate fluid samples from M-vent and Lvent. Table S2 General metagenomic and assembly characteristics of Mand L-vent chimney sample. Table S3 Taxonomic classification and relative abundance of full-length 16S rRNA genes recovered from L-vent sulfide chimney sample. Table S4 Taxonomic classification and relative abundance of full-length 16S rRNA genes recovered from M-vent sulfide chimney sample. Table S5 Completeness and contamination of 173 MAGs recovered from L-and M-vent chimney samples. Table S6: Metabolic potential of MAGs for the major microbial groups (> 1%) recovered from the L-and M-vent chimney. The specific method for estimating relative abundance/iRep are listed in the "Method and Materials" in the main text. The average iRep value of bacterial MAGs recovered from L-and Mvent sample are 1.42 and 1.51, respectively. The numbers in the metabolic pathway columns represent the percentage of the microbial taxa encoded the complete pathway (based on quantity of MAGs, e.g. 0.33 means 1 in 3 of the MAGs have the pathway). Table S7 Key genes of metabolic pathways for MAG annotation. The completeness of each metabolic pathway is classified into 3 level: 1-complete, 2 -uncomplete; 3-partial. The particular completeness classification standard for each pathway are listed in the following: Sulfide oxdation: complete-sqr or fccB; Sox pathway (thiosulfate oxidation): complete -sox A/B/X/Y/Z/C/D, uncomplete -soxB, partial: other Sox genes expect soxB/C/D; Dissimilatory sulfate reduction/oxidation: complete-sat/dsrAB/aprAB, uncomplete -two of sat/dsrAB/aprAB, partial -one of sat/dsrAB/aprAB. Subsequent dissimilatory nitrate reduction: complete-nirB or nrfA/H; uncomplete-one of nrfA/H. Subsequent denitrification: complete-nirS/K and norB/C and nosZ; uncomplete -two of nirS/K and norB/C and nosZ; partial -one of nirS/K and norB/C and nosZ. Nitrogen fixation: complete-nifK/D/H; uncomplete -two of nifD/H/K; partial -one of nifD/K/H. WL pathway: complete-cdhC or acsB and cdhE and cdhD and cooS; cdhC or acsB and one of cdhE/D and cooS; partial -two of cdhC/B and cdhE/D and cooS. CO oxidation: complete -coxM/L/S; uncomplete -coxL and one of coxS/M; partial -one of coxM/L/ S. Acetate utilization/production: complete -ACSS or pta/ack. rTCA: complete -aclA/B; uncomplete -aclA or aclB. CBB pathway: complete -rbcL/S; uncomplete -rbcL or rbcS. Methanogenesis/aerobic methane oxidation: complete -mcrA/G/B; uncomplete: two of mcrA/B/G; partialone of mcrA/G/B. Cytochrome c oxidase: complete -two Cox/Cyd/Qox genes or three cco/Cyo genes; uncomplete-one of Cox/Cyd/Qox genes or two of cco/Cyo genes; partial-one of cco/Cyo genes. Table S8 Sulfur metabolic pathways of Thermodesulfobacteria MAGs recovered. Table S9 Metabolic potential of Nitrospirae MAGs retrieved from this study and phylogenetically closed species. The red ID represented those Nitrospirae MAGs reconstructed from M-vent, the green ones represent those recovered from subseafloor massive sulfides [71] and the blue ones refer to those Nitrospirae retrieved from inactive sulfide chimneys [37]. Numbers in the form represent the completeness of specific pathways for each Nitrospirae genome/MAG, 1 indicates that complete key genes of the pathway were identified in the genomes/MAGs, other else the specific key genes were listed if the pathway is not complete. For sqr, cyctochrome C oxidase, multi-heme cyc and cyc2, numbers represent the quantity of specific genes identified in the genomes/MAGs. Table S10 Distribution and quantity of cytochrome c oxidase genes in 173 MAGs retrieved from M-and L-vent. Specific definition rules and types of cytochrome c oxidase genes could find in Table S7. Table S11 Summary of the activity, study method and microbial composition of deep-sea hydrothermal sulfide chimneys or in situ incubation experiments cited in this study.